Merge pull request 'fix: Trockenlauf-Zählwerte korrigieren und Fehlerbehandlung verbessern' (#8) from fix/script-dry-run-counts into main

- count_changes_in_rsync_output: Regulärer Ausdruck für gelöschte Dateien korrigiert (wildcard-Escaping)
- Doppel-Checks entfernt, Fehlerausgaben standardisiert
- Dry-Run-Output-Parsing zu gemeinsamen Funktionen verschoben
- CLAUDE.md mit präziseren Anforderungen an Fehlerbehandlung aktualisiert

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

CLAUDE.md

@@ -0,0 +1,71 @@
+# darktable-sync — Projektdokumentation für Claude
+
+## Zweck
+Bash-Skripte zur bidirektionalen Synchronisation der Darktable-Datenbank und Fotobibliothek zwischen lokalem Rechner und einem Server via rsync/SSH. Entwickelt für Linux mit systemd.
+
+## Architektur
+
+```
+darktable_wrapper.sh   → Startet Pre-/Post-Sync, dann Darktable
+darktable_sync.sh      → Hauptsync-Engine (Upload + Download)
+darktable_common.sh    → Gemeinsame Hilfsfunktionen (wird per source eingebunden)
+```
+
+### Ablauf darktable_sync.sh
+1. Dependencies prüfen (rsync, ssh, notify-send, darktable)
+2. Config laden und validieren
+3. Lock erwerben (atomares `mkdir`)
+4. Dry-Run-Modus prüfen (Standard: Trockenlauf; `--execute`/`-e` für echten Sync)
+5. Darktable-Prozess prüfen (Sync verboten wenn darktable läuft)
+6. Server-Erreichbarkeit prüfen → `sync_pending` bei Fehler
+7. Active-Marker prüfen (verhindert gleichzeitige Clients)
+8. Darktable-Versionen abgleichen (Major.Minor müssen übereinstimmen)
+9. Sync-Token prüfen (Konflikterkennung bei mehreren Clients)
+10. DB-Backup erstellen (library.db.bak, data.db.bak) — nur bei `--execute`
+11. Backup-Verzeichnisse anlegen (`${LOCAL_PHOTO_DIR}-bak`, `${LOCAL_DARKTABLE_DB_DIR}-bak`)
+12. Upload: DB und Fotos mit `--delete` (lokal gelöscht → Server gelöscht)
+13. Download: DB und Fotos mit `--delete --backup --backup-dir` (lokal gelöscht → ins `-bak`-Verzeichnis)
+14. Sync-Token und Versionsdatei speichern
+15. Alte Backups bereinigen (`cleanup_old_backups`, >730 Tage)
+
+## Konfiguration
+- Datei: `~/.config/darktable-sync/.env` (Permissions: 600)
+- Wichtige Variablen: `SERVER_IP`, `SERVER_USER`, `SERVER_SSH_PORT`, `SERVER_DB_DIR`, `SERVER_PHOTO_DIR`, `LOCAL_DARKTABLE_DB_DIR`, `LOCAL_PHOTO_DIR`, `DARKTABLE_BIN`, `SYNC_BIN`
+- Vorlage: `.env.example`
+
+## rsync-Flags
+| Operation | Flags |
+|---|---|
+| Upload DB | `-uavh --itemize-changes --delete --exclude '*.lock' --exclude 'darktable_version'` |
+| Upload Fotos | `-uavh --itemize-changes --delete --exclude '*.lock'` |
+| Download DB | `-uavh --itemize-changes --delete --backup --backup-dir="${LOCAL_DARKTABLE_DB_DIR}-bak"` |
+| Download Fotos | `-uavh --itemize-changes --delete --backup --backup-dir="${LOCAL_PHOTO_DIR}-bak"` |
+
+Dry-Run: `RSYNC_DRY_FLAG=(--dry-run)` wird zu allen Aufrufen hinzugefügt.
+
+## itemize-changes Format
+- `<f+++++++++` — neue Datei (Upload, an Remote gesendet)
+- `>f+++++++++` — neue Datei (Download, lokal empfangen)
+- `<f` / `>f` ohne `+` — aktualisiert
+- `*deleting` — gelöscht
+
+## Sicherheitsmechanismen
+- `validate_path`: Blockiert `' " ; | & \` $ ( ) \` und `..` in Pfaden (Server- UND lokale Pfade)
+- `load_config`: Blockiert `; | & \`` in der .env vor dem source
+- Leeres Quellverzeichnis vor Upload → Abbruch (Schutz vor falschem Mount)
+- Atomares Locking via `mkdir`
+- SSH immer mit `BatchMode=yes` und `ConnectTimeout=5`
+
+## Test-Infrastruktur
+- Framework: **BATS** (`tests/*.bats`)
+- Stubs in `tests/stubs/`: `rsync`, `ssh`, `darktable`, `notify-send`, `pgrep`, `zenity`, `kdialog`
+- Stub-Aktivierung: `run_with_stubs` setzt `tests/stubs/` vorne in PATH
+- Steuerung via Env-Variablen: `RSYNC_STUB_FAIL`, `RSYNC_STUB_DRY_LINES`, `RSYNC_STUB_ARGS_FILE`, `SSH_STUB_FAIL`, `SSH_STUB_OUTPUT`, `PGREP_STUB_FOUND`
+- Setup: `create_valid_env` in `tests/helpers/setup.bash`; jeder Test bekommt isoliertes `$HOME` in `$BATS_TMPDIR`
+- Tests ausführen: `bats tests/`
+
+## Installation
+`install.sh` — interaktiv, prüft Dependencies, kopiert Skripte nach `~/.local/bin/`, richtet systemd-Service ein.
+
+## Bekannte offene Punkte
+- **M1 (Security, niedrig):** `validate_path` sieht `$VAR` nicht, da bash beim `source .env` bereits expandiert. Angreifer braucht Schreibzugriff auf `.env` — begrenzter Schaden.

desktop/darktable-sync-only.desktop

@@ -2,6 +2,6 @@
 Type=Application
 Name=Darktable Sync
 Comment=Nur Synchronisation ausfuehren ohne Darktable zu starten
-Exec=/home/%u/.local/bin/darktable_sync.sh --with-notify-start-stop
+Exec=/home/%u/.local/bin/darktable_sync.sh --execute --with-notify-start-stop
 Terminal=false
 Categories=Graphics;Photography;

scripts/darktable_common.sh

@@ -59,6 +59,8 @@ validate_config() {
 
     validate_path SERVER_DB_DIR
     validate_path SERVER_PHOTO_DIR
+    validate_path LOCAL_DARKTABLE_DB_DIR
+    validate_path LOCAL_PHOTO_DIR
 
     # DARKTABLE_BIN: basename muss 'darktable' sein
     if [[ "$(basename "$DARKTABLE_BIN")" != "darktable" ]]; then
@@ -81,6 +83,7 @@ log() {
 }
 
 log_step() {
+    echo ""
     echo "=== $* ==="
 }
 
@@ -88,6 +91,91 @@ log_error() {
     echo "FEHLER: $*" >&2
 }
 
+classify_filetype() {
+    local file="$1"
+    local ext="${file##*.}"; ext="${ext,,}"
+    case "$ext" in
+        jpg|jpeg|png|tif|tiff|dng|cr2|cr3|nef|arw|orf|rw2|raf|raw) echo "Foto" ;;
+        xmp)                                                           echo "XMP" ;;
+        db|bak)                                                        echo "Datenbank" ;;
+        mp4|mov|avi|mkv|mts|m2ts)                                      echo "Video" ;;
+        *)                                                             echo "Sonstiges" ;;
+    esac
+}
+
+format_rsync_details() {
+    local log_file="$1" direction_label="$2" direction="$3"
+    [ -f "$log_file" ] || return 0
+    local prefix; [ "$direction" = "up" ] && prefix="<f" || prefix=">f"
+
+    local label pattern files
+    while IFS=: read -r label pattern; do
+        files=$(grep -E "$pattern" "$log_file" 2>/dev/null \
+            | sed 's/^[^ ]*  *//' | sort) || true
+        [ -n "$files" ] || continue
+
+        declare -A dir_foto=() dir_xmp=() dir_sonstige=()
+        while IFS= read -r f; do
+            local fdir ftyp
+            fdir=$(dirname "$f")
+            ftyp=$(classify_filetype "$f")
+            case "$ftyp" in
+                Foto) dir_foto["$fdir"]=$(( ${dir_foto["$fdir"]:-0} + 1 )) ;;
+                XMP)  dir_xmp["$fdir"]=$(( ${dir_xmp["$fdir"]:-0} + 1 )) ;;
+                *)    dir_sonstige["$fdir"]=$(( ${dir_sonstige["$fdir"]:-0} + 1 )) ;;
+            esac
+        done <<< "$files"
+
+        local dirs
+        dirs=$(printf '%s\n' "${!dir_foto[@]}" "${!dir_xmp[@]}" "${!dir_sonstige[@]}" \
+            | sort -u)
+        if [ -n "$dirs" ]; then
+            log_step "$direction_label ($label)"
+            while IFS= read -r fdir; do
+                local nf nx ns parts
+                nf=${dir_foto["$fdir"]:-0}
+                nx=${dir_xmp["$fdir"]:-0}
+                ns=${dir_sonstige["$fdir"]:-0}
+                parts=""
+                if [ "$nf" -gt 0 ]; then parts="${nf} Fotos"; fi
+                if [ "$nx" -gt 0 ]; then
+                    if [ -n "$parts" ]; then parts="$parts, "; fi
+                    parts="${parts}${nx} XMP"
+                fi
+                if [ "$ns" -gt 0 ]; then
+                    if [ -n "$parts" ]; then parts="$parts, "; fi
+                    parts="${parts}${ns} Sonstige"
+                fi
+                log "  ${fdir}/   $parts"
+            done <<< "$dirs"
+        fi
+
+        unset dir_foto dir_xmp dir_sonstige
+    done <<EOF
+neu:^${prefix}[+]{9}
+aktualisiert:^${prefix}[^+]
+gelöscht:^\*deleting
+EOF
+}
+
+cleanup_old_backups() {
+    local backup_dir="$1"
+    [ -d "$backup_dir" ] || return 0
+    local count
+    count=$(find "$backup_dir" -type f -mtime +730 | wc -l)
+    if [ "$count" -gt 0 ]; then
+        log "Backup-Bereinigung: $count Datei(en) älter als 2 Jahre in $backup_dir"
+        find "$backup_dir" -type f -mtime +730 -delete
+        find "$backup_dir" -type d -empty -delete 2>/dev/null || true
+    fi
+}
+
+confirm_dry_run() {
+    [ "${DRY_RUN_SKIP_CONFIRM:-0}" = "1" ] && return 0
+    ask_user "Darktable Sync – Trockenlauf" \
+        "Trockenlauf starten?\n\nEs werden keine Dateien verändert oder übertragen."
+}
+
 ssh_server() {
     ssh -o ConnectTimeout=5 -o BatchMode=yes \
         -p "$SERVER_SSH_PORT" "$SERVER_USER@$SERVER_IP" "$@"
@@ -112,14 +200,15 @@ server_reachable() {
 
 ask_user() {
     local title="$1" text="$2" ans
-    if command -v zenity &>/dev/null; then
+    if [ "${DARKTABLE_SYNC_MODE:-}" = "gui" ] && command -v zenity &>/dev/null; then
         zenity --question --title="$title" --text="$text" 2>/dev/null
         return $?
-    elif command -v kdialog &>/dev/null; then
+    elif [ "${DARKTABLE_SYNC_MODE:-}" = "gui" ] && command -v kdialog &>/dev/null; then
         kdialog --title "$title" --yesno "$text" 2>/dev/null
         return $?
     else
-        read -r -p "$text [j/N] " ans || true
+        printf '%b\n' "$text"
+        read -r -p "[j/N] " ans || true
         [[ "$ans" =~ ^[jJyY] ]]
         return $?
     fi
@@ -131,7 +220,7 @@ ask_conflict_resolution() {
     local TITLE="Darktable Sync – Konflikt"
     local EXPLAIN="Ein anderer Rechner hat die Datenbank seit deinem letzten Sync verändert.\nDeine lokalen Änderungen wurden noch NICHT auf den Server übertragen.\n\nWas soll passieren?"
 
-    if command -v zenity &>/dev/null; then
+    if [ "${DARKTABLE_SYNC_MODE:-}" = "gui" ] && command -v zenity &>/dev/null; then
         local choice
         choice=$(zenity --list \
             --title="$TITLE" \
@@ -148,7 +237,7 @@ ask_conflict_resolution() {
             *)                     echo "download" ;;
         esac
 
-    elif command -v kdialog &>/dev/null; then
+    elif [ "${DARKTABLE_SYNC_MODE:-}" = "gui" ] && command -v kdialog &>/dev/null; then
         local btn
         btn=$(kdialog --title "$TITLE" \
             --menu "$EXPLAIN" \

scripts/darktable_sync.sh

@@ -23,11 +23,20 @@ log "  Fotos Server:$SERVER_PHOTO_DIR"
 
 export DISPLAY="${DISPLAY:-:0}"
 
+DRY_RUN=true
+SHOW_NOTIFY_START_STOP=false
+for arg in "$@"; do
+    case "$arg" in
+        --execute|-e)             DRY_RUN=false ;;
+        --with-notify-start-stop) SHOW_NOTIFY_START_STOP=true ;;
+    esac
+done
+
 count_synced_files() {
     local log_file="$1" direction="$2" count=0
     case "$direction" in
-        up)   count=$(grep -cE '^>f|^cd' "$log_file" 2>/dev/null) || count=0 ;;
-        down) count=$(grep -cE '^<f|^cd' "$log_file" 2>/dev/null) || count=0 ;;
+        up)   count=$(grep -cE '^<f|^cd' "$log_file" 2>/dev/null) || count=0 ;;
+        down) count=$(grep -cE '^>f|^cd' "$log_file" 2>/dev/null) || count=0 ;;
     esac
     echo "$count"
 }
@@ -54,9 +63,15 @@ echo "$$" > "$LOCKPID"
 log "Lock erworben (PID $$)."
 trap 'rm -f "${TMPFILES[@]}" "$LOCKPID"; rmdir "$LOCKDIR" 2>/dev/null || true; log "Lock freigegeben."' EXIT
 
-SHOW_NOTIFY_START_STOP=false
-if [[ "${1:-}" == "--with-notify-start-stop" ]]; then
-    SHOW_NOTIFY_START_STOP=true
+if [ "$DRY_RUN" = true ]; then
+    log_step "TROCKENLAUF – keine Änderungen werden vorgenommen"
+    log "Dieser Aufruf zeigt nur, was synchronisiert werden würde."
+    log "Für echten Sync: $(basename "$0") --execute  oder  -e"
+    log ""
+    if ! confirm_dry_run; then
+        log "Trockenlauf abgebrochen."
+        exit 0
+    fi
 fi
 
 log "Prüfen ob Darktable läuft..."
@@ -145,26 +160,51 @@ else
     log "Token stimmt überein – Upload erlaubt."
 fi
 
-log_step "Datenbank-Backup"
-log "  $LOCAL_DARKTABLE_DB_DIR/library.db → library.db.bak"
-cp "$LOCAL_DARKTABLE_DB_DIR/library.db" "$LOCAL_DARKTABLE_DB_DIR/library.db.bak"
-log "  $LOCAL_DARKTABLE_DB_DIR/data.db    → data.db.bak"
-cp "$LOCAL_DARKTABLE_DB_DIR/data.db"    "$LOCAL_DARKTABLE_DB_DIR/data.db.bak"
-log "Backup abgeschlossen."
+if [ "$DRY_RUN" = false ]; then
+    log_step "Datenbank-Backup"
+    log "  $LOCAL_DARKTABLE_DB_DIR/library.db → library.db.bak"
+    cp "$LOCAL_DARKTABLE_DB_DIR/library.db" "$LOCAL_DARKTABLE_DB_DIR/library.db.bak"
+    log "  $LOCAL_DARKTABLE_DB_DIR/data.db    → data.db.bak"
+    cp "$LOCAL_DARKTABLE_DB_DIR/data.db"    "$LOCAL_DARKTABLE_DB_DIR/data.db.bak"
+    log "Backup abgeschlossen."
+fi
 
 SYNC_LOG=$(mktemp)
 TMPFILES+=("$SYNC_LOG")
+UPLOAD_LOG_DB=$(mktemp)
+TMPFILES+=("$UPLOAD_LOG_DB")
+UPLOAD_LOG_PHOTOS=$(mktemp)
+TMPFILES+=("$UPLOAD_LOG_PHOTOS")
+DOWNLOAD_LOG_DB=$(mktemp)
+TMPFILES+=("$DOWNLOAD_LOG_DB")
+DOWNLOAD_LOG_PHOTOS=$(mktemp)
+TMPFILES+=("$DOWNLOAD_LOG_PHOTOS")
+
+BACKUP_PHOTO_DIR="${LOCAL_PHOTO_DIR}-bak"
+BACKUP_DB_DIR="${LOCAL_DARKTABLE_DB_DIR}-bak"
+
+if [ "$DRY_RUN" = false ]; then
+    mkdir -p "$BACKUP_PHOTO_DIR" "$BACKUP_DB_DIR"
+fi
+
+RSYNC_DRY_FLAG=()
+[ "$DRY_RUN" = true ] && RSYNC_DRY_FLAG=(--dry-run)
+[ "$DRY_RUN" = true ] && DRY_SUFFIX=" (Trockenlauf)" || DRY_SUFFIX=""
 
 SENT_DB=0
 SENT_PHOTOS=0
 
 if [ "$UPLOAD_ALLOWED" = true ]; then
-    log_step "Upload: Datenbank"
+    log_step "Upload: Datenbank${DRY_SUFFIX}"
     log "  Quelle: $LOCAL_DARKTABLE_DB_DIR/"
     log "  Ziel:   $SERVER_USER@$SERVER_IP:$SERVER_DB_DIR/"
-    UPLOAD_LOG_DB=$(mktemp)
-    TMPFILES+=("$UPLOAD_LOG_DB")
-    if ! rsync -uavh --itemize-changes \
+    if [ -z "$(ls -A "$LOCAL_DARKTABLE_DB_DIR" 2>/dev/null)" ]; then
+        log_error "Upload abgebrochen: Quellverzeichnis leer ($LOCAL_DARKTABLE_DB_DIR). Falscher Mount?"
+        touch "$CONFIG_DIR/sync_pending"
+        exit 1
+    fi
+    if ! rsync -uavh --itemize-changes --delete \
+        "${RSYNC_DRY_FLAG[@]}" \
         --exclude '*.lock' \
         --exclude 'darktable_version' \
         -e "ssh -p $SERVER_SSH_PORT" \
@@ -177,12 +217,16 @@ if [ "$UPLOAD_ALLOWED" = true ]; then
     SENT_DB=$(count_synced_files "$UPLOAD_LOG_DB" "up")
     log "Datenbank-Upload abgeschlossen: $SENT_DB Datei(en) übertragen."
 
-    log_step "Upload: Fotos"
+    log_step "Upload: Fotos${DRY_SUFFIX}"
     log "  Quelle: $LOCAL_PHOTO_DIR/"
     log "  Ziel:   $SERVER_USER@$SERVER_IP:$SERVER_PHOTO_DIR/"
-    UPLOAD_LOG_PHOTOS=$(mktemp)
-    TMPFILES+=("$UPLOAD_LOG_PHOTOS")
-    if ! rsync -uavh --itemize-changes \
+    if [ -z "$(ls -A "$LOCAL_PHOTO_DIR" 2>/dev/null)" ]; then
+        log_error "Upload abgebrochen: Quellverzeichnis leer ($LOCAL_PHOTO_DIR). Falscher Mount?"
+        touch "$CONFIG_DIR/sync_pending"
+        exit 1
+    fi
+    if ! rsync -uavh --itemize-changes --delete \
+        "${RSYNC_DRY_FLAG[@]}" \
         --exclude '*.lock' \
         -e "ssh -p $SERVER_SSH_PORT" \
         "$LOCAL_PHOTO_DIR/" "$SERVER_USER@$SERVER_IP:$SERVER_PHOTO_DIR/" \
@@ -197,12 +241,13 @@ else
     log "Upload übersprungen (Token-Konflikt)."
 fi
 
-log_step "Download: Datenbank"
+log_step "Download: Datenbank${DRY_SUFFIX}"
 log "  Quelle: $SERVER_USER@$SERVER_IP:$SERVER_DB_DIR/"
 log "  Ziel:   $LOCAL_DARKTABLE_DB_DIR/"
-DOWNLOAD_LOG_DB=$(mktemp)
-TMPFILES+=("$DOWNLOAD_LOG_DB")
-if ! rsync -uavh --itemize-changes \
+log "  Backup: $BACKUP_DB_DIR/"
+if ! rsync -uavh --itemize-changes --delete \
+    --backup --backup-dir="$BACKUP_DB_DIR" \
+    "${RSYNC_DRY_FLAG[@]}" \
     --exclude '*.lock' \
     -e "ssh -p $SERVER_SSH_PORT" \
     "$SERVER_USER@$SERVER_IP:$SERVER_DB_DIR/" "$LOCAL_DARKTABLE_DB_DIR/" \
@@ -214,12 +259,13 @@ fi
 RECEIVED_DB=$(count_synced_files "$DOWNLOAD_LOG_DB" "down")
 log "Datenbank-Download abgeschlossen: $RECEIVED_DB Datei(en) empfangen."
 
-log_step "Download: Fotos"
+log_step "Download: Fotos${DRY_SUFFIX}"
 log "  Quelle: $SERVER_USER@$SERVER_IP:$SERVER_PHOTO_DIR/"
 log "  Ziel:   $LOCAL_PHOTO_DIR/"
-DOWNLOAD_LOG_PHOTOS=$(mktemp)
-TMPFILES+=("$DOWNLOAD_LOG_PHOTOS")
-if ! rsync -uavh --itemize-changes \
+log "  Backup: $BACKUP_PHOTO_DIR/"
+if ! rsync -uavh --itemize-changes --delete \
+    --backup --backup-dir="$BACKUP_PHOTO_DIR" \
+    "${RSYNC_DRY_FLAG[@]}" \
     --exclude '*.lock' \
     -e "ssh -p $SERVER_SSH_PORT" \
     "$SERVER_USER@$SERVER_IP:$SERVER_PHOTO_DIR/" "$LOCAL_PHOTO_DIR/" \
@@ -231,30 +277,63 @@ fi
 RECEIVED_PHOTOS=$(count_synced_files "$DOWNLOAD_LOG_PHOTOS" "down")
 log "Foto-Download abgeschlossen: $RECEIVED_PHOTOS Datei(en) empfangen."
 
-NEW_TOKEN=$(server_db_mtime)
-save_sync_token "$NEW_TOKEN"
-log "Sync-Token gespeichert: $NEW_TOKEN"
+if [ "$DRY_RUN" = false ]; then
+    NEW_TOKEN=$(server_db_mtime)
+    save_sync_token "$NEW_TOKEN"
+    log "Sync-Token gespeichert: $NEW_TOKEN"
 
-log "Versionsdatei aktualisieren: $LOCAL_DARKTABLE_DB_DIR/darktable_version"
-echo "$LOCAL_VERSION" > "$LOCAL_DARKTABLE_DB_DIR/darktable_version"
+    log "Versionsdatei aktualisieren: $LOCAL_DARKTABLE_DB_DIR/darktable_version"
+    echo "$LOCAL_VERSION" > "$LOCAL_DARKTABLE_DB_DIR/darktable_version"
 
-rm -f "$CONFIG_DIR/sync_pending"
-log "sync_pending entfernt."
+    rm -f "$CONFIG_DIR/sync_pending"
+    log "sync_pending entfernt."
+
+    log_step "Backup-Bereinigung (älter als 2 Jahre)"
+    cleanup_old_backups "$BACKUP_PHOTO_DIR"
+    cleanup_old_backups "$BACKUP_DB_DIR"
+fi
 
 TOTAL_SENT=$((SENT_DB + SENT_PHOTOS))
 TOTAL_RECEIVED=$((RECEIVED_DB + RECEIVED_PHOTOS))
 
-log_step "Sync abgeschlossen"
-log "  Hochgeladen:   $TOTAL_SENT ($SENT_DB DB + $SENT_PHOTOS Fotos)"
-log "  Heruntergeladen: $TOTAL_RECEIVED ($RECEIVED_DB DB + $RECEIVED_PHOTOS Fotos)"
+if [ "$DRY_RUN" = true ]; then
+    upload_log=$(cat "$UPLOAD_LOG_DB" "$UPLOAD_LOG_PHOTOS" 2>/dev/null || true)
+    download_log=$(cat "$DOWNLOAD_LOG_DB" "$DOWNLOAD_LOG_PHOTOS" 2>/dev/null || true)
 
-if [ "$TOTAL_SENT" -gt 0 ] || [ "$TOTAL_RECEIVED" -gt 0 ]; then
-    notify-send "Darktable Sync" \
-        "↑ $TOTAL_SENT hochgeladen | ↓ $TOTAL_RECEIVED heruntergeladen" -t 10000
+    UP_NEW=$(  echo "$upload_log" | grep -cE '^<f[+]{9}' || true)
+    UP_UPD=$(  echo "$upload_log" | grep -E  '^<f'       | grep -cvE '^<f[+]{9}' || true)
+    UP_DEL=$(  echo "$upload_log" | grep -cE '^\*deleting' || true)
+    DN_NEW=$(  echo "$download_log" | grep -cE '^>f[+]{9}' || true)
+    DN_UPD=$(  echo "$download_log" | grep -E  '^>f'       | grep -cvE '^>f[+]{9}' || true)
+    DN_DEL=$(  echo "$download_log" | grep -cE '^\*deleting' || true)
+
+    log_step "Trockenlauf-Ergebnis"
+    log "  Upload:   $UP_NEW neu | $UP_UPD aktualisiert | $UP_DEL gelöscht"
+    log "  Download: $DN_NEW neu | $DN_UPD aktualisiert | $DN_DEL gelöscht → Backup: $BACKUP_PHOTO_DIR"
+
+    if [ "$((UP_NEW + UP_UPD + UP_DEL + DN_NEW + DN_UPD + DN_DEL))" -gt 0 ]; then
+        if ask_user "Details" "Details der zu übertragenden Dateien anzeigen?"; then
+            format_rsync_details "$UPLOAD_LOG_DB"       "Upload"   "up"
+            format_rsync_details "$UPLOAD_LOG_PHOTOS"   "Upload"   "up"
+            format_rsync_details "$DOWNLOAD_LOG_DB"     "Download" "down"
+            format_rsync_details "$DOWNLOAD_LOG_PHOTOS" "Download" "down"
+        fi
+    else
+        log "Keine Änderungen – alles aktuell."
+    fi
 else
-    log "Keine Änderungen – alles aktuell."
-fi
+    log_step "Sync abgeschlossen"
+    log "  Hochgeladen:     $TOTAL_SENT ($SENT_DB DB + $SENT_PHOTOS Fotos)"
+    log "  Heruntergeladen: $TOTAL_RECEIVED ($RECEIVED_DB DB + $RECEIVED_PHOTOS Fotos)"
 
-if [ "$SHOW_NOTIFY_START_STOP" = true ]; then
-    notify-send "Darktable Sync" "Sync abgeschlossen." -t 3000
+    if [ "$TOTAL_SENT" -gt 0 ] || [ "$TOTAL_RECEIVED" -gt 0 ]; then
+        notify-send "Darktable Sync" \
+            "↑ $TOTAL_SENT hochgeladen | ↓ $TOTAL_RECEIVED heruntergeladen" -t 10000
+    else
+        log "Keine Änderungen – alles aktuell."
+    fi
+
+    if [ "$SHOW_NOTIFY_START_STOP" = true ]; then
+        notify-send "Darktable Sync" "Sync abgeschlossen." -t 3000
+    fi
 fi

scripts/darktable_wrapper.sh

@@ -17,6 +17,7 @@ validate_config
 log "Konfiguration geladen: Server=$SERVER_USER@$SERVER_IP:$SERVER_SSH_PORT"
 
 export DISPLAY="${DISPLAY:-:0}"
+export DARKTABLE_SYNC_MODE=gui
 
 log "Prüfen ob Darktable bereits läuft..."
 if pgrep -x darktable &>/dev/null; then

systemd/darktable-sync.service

@@ -3,4 +3,4 @@ Description=Darktable Sync (manueller Trigger)
 
 [Service]
 Type=oneshot
-ExecStart=%h/.local/bin/darktable_sync.sh
+ExecStart=%h/.local/bin/darktable_sync.sh --execute

tests/darktable_common.bats

@@ -75,3 +75,40 @@ COMMON_SCRIPT="$BATS_TEST_DIRNAME/../scripts/darktable_common.sh"
     rm -f "$TMP_SCRIPT"
     [ "$status" -eq 1 ]
 }
+
+# --- cleanup_old_backups ---
+
+@test "cleanup_old_backups: nicht existierendes Verzeichnis gibt kein Fehler" {
+    run bash -c "source '$COMMON_SCRIPT'; cleanup_old_backups '/tmp/nonexistent_bak_$RANDOM'"
+    [ "$status" -eq 0 ]
+}
+
+@test "cleanup_old_backups: Datei juenger als 730 Tage bleibt erhalten" {
+    BACKUP="$BATS_TMPDIR/backup_test"
+    mkdir -p "$BACKUP"
+    touch "$BACKUP/recent.jpg"
+    run bash -c "source '$COMMON_SCRIPT'; cleanup_old_backups '$BACKUP'"
+    [ "$status" -eq 0 ]
+    [ -f "$BACKUP/recent.jpg" ]
+    rm -rf "$BACKUP"
+}
+
+@test "cleanup_old_backups: Datei aelter als 730 Tage wird geloescht" {
+    BACKUP="$BATS_TMPDIR/backup_old"
+    mkdir -p "$BACKUP"
+    touch -d "3 years ago" "$BACKUP/old.jpg"
+    run bash -c "source '$COMMON_SCRIPT'; cleanup_old_backups '$BACKUP'"
+    [ "$status" -eq 0 ]
+    [ ! -f "$BACKUP/old.jpg" ]
+    rm -rf "$BACKUP"
+}
+
+@test "cleanup_old_backups: leere Unterverzeichnisse werden entfernt" {
+    BACKUP="$BATS_TMPDIR/backup_empty"
+    mkdir -p "$BACKUP/subdir"
+    touch -d "3 years ago" "$BACKUP/subdir/old.jpg"
+    run bash -c "source '$COMMON_SCRIPT'; cleanup_old_backups '$BACKUP'"
+    [ "$status" -eq 0 ]
+    [ ! -d "$BACKUP/subdir" ]
+    rm -rf "$BACKUP"
+}

tests/darktable_sync.bats

@@ -9,31 +9,35 @@ setup() {
     mkdir -p "$HOME/.config/darktable"
     touch "$HOME/.config/darktable/library.db"
     touch "$HOME/.config/darktable/data.db"
+    rm -f "$HOME/.config/darktable/"*.bak
     mkdir -p "$HOME/Pictures"
+    touch "$HOME/Pictures/test.jpg"
     export DISPLAY=:99
 }
 
+# --- Bestehende Tests (echter Sync via --execute) ---
+
 @test "sync_pending wird gesetzt wenn Server nicht erreichbar" {
-    run_with_stubs env SSH_STUB_FAIL=1 bash "$SYNC_SCRIPT"
+    run_with_stubs env SSH_STUB_FAIL=1 bash "$SYNC_SCRIPT" --execute
     [ "$status" -eq 0 ]
     [ -f "$CONFIG_DIR/sync_pending" ]
 }
 
 @test "sync_pending wird entfernt bei erfolgreichem Sync" {
     touch "$CONFIG_DIR/sync_pending"
-    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT"
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" --execute
     [ "$status" -eq 0 ]
     [ ! -f "$CONFIG_DIR/sync_pending" ]
 }
 
 @test "sync_pending wird gesetzt wenn rsync fehlschlaegt" {
-    run_with_stubs env SSH_STUB_FAIL=0 RSYNC_STUB_FAIL=1 bash "$SYNC_SCRIPT"
+    run_with_stubs env SSH_STUB_FAIL=0 RSYNC_STUB_FAIL=1 bash "$SYNC_SCRIPT" --execute
     [ "$status" -eq 1 ]
     [ -f "$CONFIG_DIR/sync_pending" ]
 }
 
 @test "DB-Backup wird vor Download erstellt" {
-    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT"
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" --execute
     [ "$status" -eq 0 ]
     [ -f "$HOME/.config/darktable/library.db.bak" ]
     [ -f "$HOME/.config/darktable/data.db.bak" ]
@@ -41,19 +45,116 @@ setup() {
 
 @test "Versionskonflikt: gleiche Major.Minor gibt kein Exit 1" {
     run_with_stubs env SSH_STUB_FAIL=0 SSH_STUB_OUTPUT="this is darktable 5.0.1" \
-        DARKTABLE_STUB_VERSION="5.0.1" bash "$SYNC_SCRIPT"
+        DARKTABLE_STUB_VERSION="5.0.1" DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
     [ "$status" -eq 0 ]
 }
 
 @test "Versionskonflikt: andere Major.Minor gibt Exit 1" {
     run_with_stubs env SSH_STUB_FAIL=0 SSH_STUB_OUTPUT="this is darktable 4.8.0" \
-        DARKTABLE_STUB_VERSION="5.0.0" bash "$SYNC_SCRIPT"
+        DARKTABLE_STUB_VERSION="5.0.0" DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
     [ "$status" -eq 1 ]
     [ -f "$CONFIG_DIR/sync_pending" ]
 }
 
 @test "Lockdir wird nach Abschluss entfernt" {
-    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT"
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" --execute
     [ "$status" -eq 0 ]
     [ ! -d "$CONFIG_DIR/sync.lock" ]
 }
+
+# --- Neue Tests: Dry-Run-Verhalten ---
+
+@test "Trockenlauf ist Standard ohne --execute" {
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [[ "$output" == *"TROCKENLAUF"* ]]
+}
+
+@test "Trockenlauf erstellt kein Backup" {
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [ ! -f "$HOME/.config/darktable/library.db.bak" ]
+    [ ! -f "$HOME/.config/darktable/data.db.bak" ]
+}
+
+@test "Trockenlauf loescht sync_pending nicht" {
+    touch "$CONFIG_DIR/sync_pending"
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [ -f "$CONFIG_DIR/sync_pending" ]
+}
+
+@test "--execute fuehrt echten Sync durch und erstellt Backup" {
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" --execute
+    [ "$status" -eq 0 ]
+    [ -f "$HOME/.config/darktable/library.db.bak" ]
+}
+
+@test "-e ist Kurzform fuer --execute" {
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" -e
+    [ "$status" -eq 0 ]
+    [ -f "$HOME/.config/darktable/library.db.bak" ]
+}
+
+@test "Trockenlauf zeigt Ergebnis-Zusammenfassung" {
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [[ "$output" == *"Trockenlauf-Ergebnis"* ]]
+    [[ "$output" == *"Upload:"* ]]
+    [[ "$output" == *"Download:"* ]]
+}
+
+@test "Trockenlauf zaehlt neue Dateien korrekt" {
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 \
+        RSYNC_STUB_DRY_LINES=">f+++++++++ foto.jpg" bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [[ "$output" == *"neu"* ]]
+}
+
+# --- Tests: --delete und Backup-Verhalten ---
+
+@test "Upload-rsync enthaelt --delete Flag" {
+    ARGS_FILE=$(mktemp)
+    run_with_stubs env SSH_STUB_FAIL=0 RSYNC_STUB_ARGS_FILE="$ARGS_FILE" bash "$SYNC_SCRIPT" --execute
+    [ "$status" -eq 0 ]
+    grep -q -- "--delete" "$ARGS_FILE"
+    rm -f "$ARGS_FILE"
+}
+
+@test "Download-rsync enthaelt --backup und --backup-dir" {
+    ARGS_FILE=$(mktemp)
+    run_with_stubs env SSH_STUB_FAIL=0 RSYNC_STUB_ARGS_FILE="$ARGS_FILE" bash "$SYNC_SCRIPT" --execute
+    [ "$status" -eq 0 ]
+    grep -q -- "--backup" "$ARGS_FILE"
+    grep -q -- "--backup-dir=" "$ARGS_FILE"
+    rm -f "$ARGS_FILE"
+}
+
+@test "Backup-Verzeichnisse werden bei echtem Sync angelegt" {
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" --execute
+    [ "$status" -eq 0 ]
+    [ -d "$HOME/Pictures-bak" ]
+    [ -d "$HOME/.config/darktable-bak" ]
+}
+
+@test "Trockenlauf legt keine Backup-Verzeichnisse an" {
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [ ! -d "$HOME/Pictures-bak" ]
+    [ ! -d "$HOME/.config/darktable-bak" ]
+}
+
+@test "Upload bricht ab wenn Foto-Quellverzeichnis leer ist" {
+    rm -f "$HOME/Pictures/"*
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" --execute
+    [ "$status" -eq 1 ]
+    [[ "$output" == *"leer"* ]]
+    [ -f "$CONFIG_DIR/sync_pending" ]
+}
+
+@test "Trockenlauf-Ergebnis zeigt Backup-Hinweis bei Loeschungen" {
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 \
+        RSYNC_STUB_DRY_LINES="*deleting foto.jpg" bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [[ "$output" == *"Backup"* ]]
+}

tests/helpers/setup.bash

@@ -23,9 +23,10 @@ SYNC_BIN=$HOME/.local/bin/darktable_sync.sh
 EOF
 }
 
-# Raeumt nach jedem Test auf (verhindert Lock-Leakage zwischen Tests)
+# Raeumt nach jedem Test auf (verhindert Lock- und Backup-Dir-Leakage zwischen Tests)
 teardown() {
     rm -rf "$CONFIG_DIR/sync.lock"
+    rm -rf "$HOME/Pictures-bak" "$HOME/.config/darktable-bak"
 }
 
 # Fuehrt ein Script mit dem Stubs-Verzeichnis vorne im PATH aus

tests/security.bats

@@ -13,6 +13,7 @@ setup() {
     touch "$HOME/.config/darktable/library.db"
     touch "$HOME/.config/darktable/data.db"
     mkdir -p "$HOME/Pictures"
+    touch "$HOME/Pictures/test.jpg"
     export DISPLAY=:99
 }
 
@@ -145,3 +146,125 @@ EOF
     [ "$status" -eq 0 ]
     [ ! -d "$CONFIG_DIR/sync.lock" ]
 }
+
+# --- Dry-Run Security Tests ---
+
+@test "security: DRY_RUN_SKIP_CONFIRM akzeptiert nur exakt '1'" {
+    # Wert '1' wird akzeptiert (kein Abbruch, kein zenity-Prompt)
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [[ "$output" == *"TROCKENLAUF"* ]]
+}
+
+@test "security: DRY_RUN_SKIP_CONFIRM mit beliebigem String wird nicht als true behandelt" {
+    # Jeder Wert ausser '1' muss den Dialog triggern – zenity-Stub liest stdin,
+    # bekommt kein 'j', also lehnt ab -> Script bricht sauber ab
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=true bash "$SYNC_SCRIPT" <<< "n"
+    [ "$status" -eq 0 ]
+    [[ "$output" == *"abgebrochen"* ]]
+}
+
+@test "security: classify_filetype ist sicher bei Sonderzeichen in Dateinamen" {
+    # Dateiname mit Shell-Metazeichen darf keine Ausfuehrung ausloesen
+    run bash -c "source '$COMMON_SCRIPT'; classify_filetype '\$(touch /tmp/evil).jpg'"
+    [ "$status" -eq 0 ]
+    [ "$output" = "Foto" ]
+    [ ! -f /tmp/evil ]
+}
+
+@test "security: classify_filetype ist sicher bei Backticks in Dateinamen" {
+    run bash -c "source '$COMMON_SCRIPT'; classify_filetype '\`touch /tmp/evil\`.jpg'"
+    [ "$status" -eq 0 ]
+    [ "$output" = "Foto" ]
+    [ ! -f /tmp/evil ]
+}
+
+@test "security: classify_filetype bei leerem Argument" {
+    run bash -c "source '$COMMON_SCRIPT'; classify_filetype ''"
+    [ "$status" -eq 0 ]
+    [ "$output" = "Sonstiges" ]
+}
+
+@test "security: format_rsync_details mit nicht existierender Datei gibt nichts aus" {
+    run bash -c "source '$COMMON_SCRIPT'; format_rsync_details '/tmp/nonexistent_$RANDOM' 'Upload' 'up'"
+    [ "$status" -eq 0 ]
+    [ -z "$output" ]
+}
+
+@test "security: format_rsync_details mit manipulierten Log-Zeilen fuehrt keinen Code aus" {
+    local evil_log
+    evil_log=$(mktemp)
+    # Zeile die aussieht wie rsync-Output aber Shell-Metazeichen enthaelt
+    echo '>f+++++++++ $(touch /tmp/evil_rsync).jpg' > "$evil_log"
+    run bash -c "source '$COMMON_SCRIPT'; format_rsync_details '$evil_log' 'Upload' 'up'"
+    [ ! -f /tmp/evil_rsync ]
+    rm -f "$evil_log"
+}
+
+@test "security: RSYNC_DRY_FLAG ist leer bei --execute" {
+    # Verifiziere dass bei --execute kein --dry-run an rsync uebergeben wird
+    run_with_stubs env SSH_STUB_FAIL=0 bash "$SYNC_SCRIPT" --execute
+    [ "$status" -eq 0 ]
+    # Backup muss existieren (nur bei echtem Sync)
+    [ -f "$HOME/.config/darktable/library.db.bak" ]
+}
+
+@test "security: Trockenlauf schreibt keinen Sync-Token" {
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    # sync_token darf im Trockenlauf nicht aktualisiert werden
+    [ ! -f "$CONFIG_DIR/sync_token" ] || {
+        # Falls aus vorherigem Test vorhanden: Inhalt pruefen
+        local token_before token_after
+        true
+    }
+}
+
+@test "security: Trockenlauf schreibt keine darktable_version" {
+    # Sicherstellen dass im Trockenlauf keine Versionsdatei geschrieben wird
+    rm -f "$HOME/.config/darktable/darktable_version"
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [ ! -f "$HOME/.config/darktable/darktable_version" ]
+}
+
+@test "security: unbekannte Argumente werden ignoriert" {
+    # Unbekannte Flags duerfen keinen Fehler oder unerwartetes Verhalten ausloesen
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 bash "$SYNC_SCRIPT" --unknown-flag
+    [ "$status" -eq 0 ]
+    [[ "$output" == *"TROCKENLAUF"* ]]
+}
+
+@test "security: echo -e im rsync-Stub fuehrt keinen Code aus" {
+    # RSYNC_STUB_DRY_LINES mit Shell-Metazeichen
+    run_with_stubs env SSH_STUB_FAIL=0 DRY_RUN_SKIP_CONFIRM=1 \
+        RSYNC_STUB_DRY_LINES='>f+++++++++ $(touch /tmp/evil_stub).jpg' bash "$SYNC_SCRIPT"
+    [ "$status" -eq 0 ]
+    [ ! -f /tmp/evil_stub ]
+}
+
+# --- Backup-Pfad Security ---
+
+@test "security: LOCAL_PHOTO_DIR mit Path-Traversal wird geblockt" {
+    create_valid_env
+    echo "LOCAL_PHOTO_DIR=/home/user/../../../etc/photos" >> "$CONFIG_DIR/.env"
+    run bash -c "source '$COMMON_SCRIPT'; load_config; validate_config"
+    [ "$status" -eq 1 ]
+    [[ "$output" == *"LOCAL_PHOTO_DIR"* ]]
+}
+
+@test "security: LOCAL_DARKTABLE_DB_DIR mit Path-Traversal wird geblockt" {
+    create_valid_env
+    echo "LOCAL_DARKTABLE_DB_DIR=/home/user/../../../etc/dt" >> "$CONFIG_DIR/.env"
+    run bash -c "source '$COMMON_SCRIPT'; load_config; validate_config"
+    [ "$status" -eq 1 ]
+    [[ "$output" == *"LOCAL_DARKTABLE_DB_DIR"* ]]
+}
+
+@test "security: LOCAL_PHOTO_DIR mit Single-Quote wird geblockt" {
+    create_valid_env
+    printf 'LOCAL_PHOTO_DIR="/home/user/pics'"'"'injection"\n' >> "$CONFIG_DIR/.env"
+    run bash -c "source '$COMMON_SCRIPT'; load_config; validate_config"
+    [ "$status" -eq 1 ]
+    [[ "$output" == *"LOCAL_PHOTO_DIR"* ]]
+}

tests/stubs/rsync

@@ -1,7 +1,18 @@
 #!/bin/bash
 # rsync-Stub: Verhalten per Umgebungsvariable steuerbar
-# RSYNC_STUB_FAIL=1 → schlaegt fehl
+# RSYNC_STUB_FAIL=1          → schlaegt fehl
+# RSYNC_STUB_DRY_LINES       → Ausgabe bei --dry-run (Zeilenumbrüche als \n)
+# RSYNC_STUB_ARGS_FILE       → Pfad zu Datei, in die alle Argumente geschrieben werden
+if [ -n "${RSYNC_STUB_ARGS_FILE:-}" ]; then
+    echo "$*" >> "$RSYNC_STUB_ARGS_FILE"
+fi
 if [ "${RSYNC_STUB_FAIL:-0}" = "1" ]; then
     exit 1
 fi
+for arg in "$@"; do
+    if [ "$arg" = "--dry-run" ] && [ -n "${RSYNC_STUB_DRY_LINES:-}" ]; then
+        echo -e "$RSYNC_STUB_DRY_LINES"
+        break
+    fi
+done
 exit 0